Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY › from 2016.01
RM3270E _55 Steering _041697 STEERING COLUMN _0201966 STEERING COLUMN ASSEMBLY A

STEERING COLUMN  STEERING COLUMN ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 45250 1.INSTALL STEERING COLUMN ASSEMBLY

a.

Install the steering column assembly with the 2 nuts and bolt.

Torque:
36 N*m (367 kgf*cm, 27 ft.*lbf)


b.

Connect the connectors and attach the wire harness clamps.


Hide 45025D 2.INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

a.
C322165N01
2.49,1.49 2.646,1.688 0.156,0.198 10 true 1 0.885,1.708 1.042,1.906 0.156,0.198 10 true 2 1.01,0.5 1.167,0.698 0.156,0.198 10 true 3

Install the steering column hole cover sub-assembly with the 3 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

HINT:

Install the bolts in the order shown in the illustration.



Hide 45219 3.CONNECT STEERING SLIDING YOKE

Hide 73900 4.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 5.INSTALL COMBINATION SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

a.

Attach the 3 claws to install the combination switch assembly with spiral cable sub-assembly to the steering column sub-assembly.


b.

Connect the connectors to the combination switch assembly with spiral cable sub-assembly to the spiral cable assembly.


Hide 45286B 6.INSTALL STEERING COLUMN UPPER COVER

a.

Attach the 2 claws and 2 guides to install the steering column upper cover.


Hide 45287 7.INSTALL STEERING COLUMN LOWER COVER

a.

Attach the 2 claws and 6 guides to install the steering column lower cover.


b.

Install the 3 screws.


Hide 45100 8.INSTALL STEERING WHEEL ASSEMBLY

Hide 9.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 28800 10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION