Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 5L-E) › from 2016.01
RM3270E _55 Steering _041696 POWER ASSIST SYSTEMS _0233645 VANE PUMP(for 5L-E) A

POWER ASSIST SYSTEMS  VANE PUMP(for 5L-E)  INSTALLATION  


PROCEDURE

Hide 44320 1.INSTALL VANE PUMP ASSEMBLY

a.
C123346N01
1,1.406 1.156,1.604 0.156,0.198 10 true B 3.042,0.469 3.198,0.667 0.156,0.198 10 true A 2.99,1.094 3.146,1.292 0.156,0.198 10 true C

Install the vane pump with the 2 bolts and nut.

Torque:
for bolt A:

48 N*m (489 kgf*cm, 35 ft.*lbf)

for nut C:

63 N*m (642 kgf*cm, 46 ft.*lbf)


HINT:

Turn nut (C) while holding bolt (B).



Hide 2.INSTALL VANE PUMP PULLEY

a.
C123345C01
1.156,3.25 1.021,3.479 false 1.573,0.146 1.906,0.302 0.333,0.156 10 false *a 0.813,3.5 1.167,3.719 0.354,0.219 10 false SST 0.667,0.188 0.875,0.375 0.208,0.188 10 true *b
*a Hold
*b Turn


Using SST, install the vane pump pulley to the vane pump assembly.

SST
09960-10010  (09962-01000, 09963-01000)

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 44411 3.CONNECT PRESSURE FEED HOSE

a.

Install a new gasket to the pressure feed hose.


b.

Connect the pressure feed hose to the vane pump assembly the union bolt.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)

HINT:

Make sure that the stopper of the pressure feed hose touches the front housing.



Hide 44348A 4.CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE

a.

Connect the No. 1 oil reservoir to pump hose to the oil reservoir sub-assembly and slide the hose clamp.


Hide 6.ADD POWER STEERING FLUID

Hide 8.CHECK FOR FLUID LEAKS