Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(w/ Turn Over) › from 2016.01
RM3270E _52 Drivetrain _041682 CLUTCH _0201971 CLUTCH MASTER CYLINDER(w/ Turn Over) A

CLUTCH  CLUTCH MASTER CYLINDER(w/ Turn Over)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.DRAIN CLUTCH FLUID

NOTICE:

Wash off clutch fluid immediately if it comes into contact with a painted surface.


Hide 2.DISCONNECT INTELLIGENT MANUAL TRANSMISSION CONNECTOR (w/ Intelligent Manual Transmission)

a.
C319923

Disconnect the intelligent manual transmission connector from the clutch master cylinder assembly.


Hide 31434 3.DISCONNECT CLUTCH RESERVOIR TUBE

a.
C319924C01
0.042,0.031 0.427,0.438 0.385,0.406 10 true *A 0.031,2.479 0.375,2.823 0.344,0.344 10 true *B
*A w/o Intelligent Manual Transmission
*B w/ Intelligent Manual Transmission


Slide the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31481 4.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C319925C01
0.073,0 0.427,0.333 0.354,0.333 10 true *A 0.104,2.458 0.458,2.802 0.354,0.344 10 true *B
*A w/o Intelligent Manual Transmission
*B w/ Intelligent Manual Transmission


Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 5.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

Hide 31410 6.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C324306

w/o Master Cylinder Bracket:

i.

Remove the 2 nuts, clutch master cylinder assembly and gasket.



b.

w/ Master Cylinder Bracket:

i.

Remove the 2 nuts, clutch master cylinder assembly, master cylinder bracket and 2 gaskets.