Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(w/ Turn Over) › from 2016.01
RM3270E _52 Drivetrain _041682 CLUTCH _0201971 CLUTCH MASTER CYLINDER(w/ Turn Over) A

CLUTCH  CLUTCH MASTER CYLINDER(w/ Turn Over)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 31410 1.INSTALL CLUTCH MASTER CYLINDER ASSEMBLY

a.

w/o Master Cylinder Bracket:

i.

Install a new gasket and the clutch master cylinder assembly with the 2 nuts.

Torque:
18.4 N*m (188 kgf*cm, 14 ft.*lbf)



b.

w/ Master Cylinder Bracket:

i.

Install 2 new gaskets, the master cylinder bracket and the clutch master cylinder assembly with the 2 nuts.

Torque:
18.4 N*m (188 kgf*cm, 14 ft.*lbf)



Hide 2.CONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

Hide 31481 3.CONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C322724C01
0.021,0.052 0.365,0.365 0.344,0.313 10 true *A 0.021,2.479 0.313,2.771 0.292,0.292 10 true *B 1.708,1.677 2.073,1.865 0.365,0.188 10 true *a
*A w/o Intelligent Manual Transmission
*B w/ Intelligent Manual Transmission
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the clutch master cylinder to flexible hose tube.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)




Hide 31434 4.CONNECT CLUTCH RESERVOIR TUBE

a.

Connect the clutch reservoir tube to the clutch master cylinder assembly, and slide the clip to secure it.

NOTICE:

Connect the clutch reservoir hose so that it is not twisted.



Hide 5.CONNECT INTELLIGENT MANUAL TRANSMISSION CONNECTOR (w/ Intelligent Manual Transmission)

a.

Connect the intelligent manual transmission connector to the clutch master cylinder assembly.


Hide 6.BLEED CLUTCH PIPE LINE

Hide 7.CHECK FOR CLUTCH FLUID LEAKAGE

HINT:

Check for leaks in the clutch system.


Hide 31301 8.INSPECT AND ADJUST CLUTCH PEDAL ASSEMBLY

Hide 9.CHECK FLUID LEVEL IN RESERVOIR