Home › Engine / Hybrid System › 5L-E ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048946 5L-E ENGINE CONTROL _0235261 ENGINE COOLANT TEMPERATURE SENSOR A

5L-E ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
A343702

Do not remove the radiator reservoir cap sub-assembly, vent plug, radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

·
A343690

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.



PROCEDURE

Hide 89422C 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.

Disconnect the connector from the engine coolant temperature sensor.


b.
A378208

Remove the engine coolant temperature sensor and gasket from the cylinder head sub-assembly.