Home › Drivetrain › CLUTCH › CLUTCH UNIT(for R151) › from 2016.01
RM3270E _52 Drivetrain _041682 CLUTCH _0235336 CLUTCH UNIT(for R151) A

CLUTCH  CLUTCH UNIT(for R151)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

The illustrations in the procedures show a representative example of the shape of the part.


PROCEDURE

Hide 33030 1.REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY

Hide 31126 2.REMOVE CLUTCH RELEASE FORK BOOT

Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.

Remove the clutch release bearing assembly together with the clutch release fork sub-assembly from the clutch housing.


b.

Remove the clutch release fork sub-assembly from the clutch release bearing assembly.


c.

Remove the release bearing hub clip from the clutch release bearing assembly.


Hide 31236B 4.REMOVE RELEASE FORK SUPPORT

a.

Remove the release fork support from the manual transmission unit.


Hide 31210 5.REMOVE CLUTCH COVER ASSEMBLY

a.
C322145C01
1.208,1.469 1.031,1.938 1.031,1.938 1.104,1.531 true 0.938,1.927 1.25,2.125 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the clutch cover assembly and flywheel.


b.

Loosen each set bolt one turn at a time until spring tension is released.


c.

Remove the 6 set bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 6.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.


Hide 31237 7.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT

a.

Remove the release fork support spring from the clutch release fork sub-assembly.


b.

Remove the clutch release fork support boot from the clutch release fork sub-assembly.