Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _049378 1KD-FTV ENGINE CONTROL _0236324 CRANKSHAFT POSITION SENSOR A

1KD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301L 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt to the timing gear cover.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


c.

Attach the 4 clamps and connect the crankshaft position sensor connector.


Hide 51442 2.INSTALL NO. 2 ENGINE UNDER COVER

Hide 51410 3.INSTALL NO. 1 ENGINE UNDER COVER