Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _049378 1KD-FTV ENGINE CONTROL _0236327 MANIFOLD ABSOLUTE PRESSURE SENSOR A

1KD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421C 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

Install the manifold absolute pressure sensor with the bolt to the intercooler assembly.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the vacuum hose and manifold absolute pressure sensor connector.


c.

Install the gas filter with the bolt to the intercooler assembly.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY