Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048930 2KD-FTV ENGINE CONTROL _0236333 CAMSHAFT POSITION SENSOR A

2KD-FTV ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CAMSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt to the timing gear cover.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


c.

Connect the camshaft position sensor connector.