Home › Engine / Hybrid System › 2KD-FTV COOLING › RADIATOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048935 2KD-FTV COOLING _0237583 RADIATOR A

2KD-FTV COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 53294C 2.REMOVE RADIATOR SIDE DEFLECTOR

Hide 51410 3.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 16593 4.REMOVE NO. 1 RADIATOR AIR GUIDE

a.
A346032

Remove the 4 clips and No. 1 radiator air guide.

NOTICE:

Do not reuse the clip.



Hide 16571C 5.REMOVE NO. 1 RADIATOR HOSE

a.
A346033

Slide the 2 hose clamps and remove the No. 1 radiator hose.


Hide 44360 6.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

a.
A346034

Detach the clamp to disconnect the pressure feed tube assembly from the fan shroud.


b.

Detach the claw and disconnect the vane pump oil reservoir assembly from the oil reservoir bracket as shown in the illustration.


Hide 44369A 7.REMOVE OIL RESERVOIR BRACKET

a.
A346035

Remove the 3 bolts and oil reservoir bracket.


Hide 16470 8.REMOVE RADIATOR RESERVOIR

a.
A341284

Detach the clamp to disconnect the No. 2 water by-pass hose from the fan shroud.


b.

Slide the hose clamp and disconnect the No. 2 water by-pass hose from the radiator assembly.


c.
A346036

Slide the hose clamp and disconnect the water by-pass hose from the radiator assembly.


d.

Remove the 2 bolts and radiator reservoir.


Hide 16711 9.REMOVE FAN SHROUD

a.
A346041

Detach the 6 wire harness clamps.


b.
A346039

Loosen the 4 nuts holding the fan with fluid coupling assembly.


c.

Remove the fan and generator V belt.

Click hereEngine / Hybrid System>2KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL


d.
A341287

Detach the 2 claws and 2 guides to disconnect the fan shroud from the radiator assembly.


e.

Remove the 4 nuts of the fluid coupling assembly and remove the fan shroud together with the fluid coupling assembly.

NOTICE:

Do not allow the radiator assembly to interfere with other parts.



f.

Remove the fan pulley from the engine water pump assembly.


Hide 16572D 10.DISCONNECT NO. 2 RADIATOR HOSE

a.
A346042

Slide the hose clamp and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 16400 11.REMOVE RADIATOR ASSEMBLY

a.
A346043

Remove the 4 bolts.


b.
A341292

w/ Air conditioning system:

Detach the 2 claws and 2 guides to disconnect the cooler condenser assembly from the radiator assembly.

NOTICE:
·

Do not allow the radiator assembly to interfere with other parts.

·

Do not apply any excessive force to the cooler condenser assembly and cooler pipe.




c.

Remove the radiator assembly from the vehicle.


Hide 16400B 12.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug from the radiator assembly.


b.

Remove the O-ring from the radiator drain cock plug.