Home › Engine / Hybrid System › 5L-E COOLING › RADIATOR › from 2016.01
RM3270E _51 Engine / Hybrid System _048955 5L-E COOLING _0237588 RADIATOR A

5L-E COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343701

Do not remove the radiator cap sub-assembly, cylinder block water drain cock plug or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


PROCEDURE

Hide 53294C 1.REMOVE RADIATOR SIDE DEFLECTOR

Hide 51410 2.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 16571C 4.REMOVE NO. 1 RADIATOR HOSE

a.
A337035

Slide the 2 hose clamps and remove the No. 1 radiator hose.


Hide 44360 5.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

a.
A337036

Detach the clamp to disconnect the pressure feed tube assembly from the fan shroud.


b.

Detach the claw and disconnect the vane pump oil reservoir assembly from the oil reservoir bracket as shown in the illustration.


Hide 44369A 6.REMOVE OIL RESERVOIR BRACKET

a.
A337037

Remove the 3 bolts and oil reservoir bracket.


Hide 16470 7.REMOVE RADIATOR RESERVOIR

a.
A337038

Disconnect the reservoir hose and detach the 2 clamps from the fan shroud.


b.

Remove the 2 bolts and radiator reservoir.


Hide 16711 8.REMOVE FAN SHROUD

a.
A337039

Loosen the 4 nuts holding the fan with fluid coupling assembly.


b.

Remove the fan and generator V belt.

Click hereEngine / Hybrid System>5L-E ENGINE MECHANICAL>DRIVE BELT>REMOVAL


c.
A341287

Detach the 2 claws and 2 guides to disconnect the fan shroud from the radiator assembly.


d.

Remove the 4 nuts of the fluid coupling assembly and remove the fan shroud together with the fluid coupling assembly.

NOTICE:

Do not allow the radiator assembly to interfere with other parts.



e.

Remove the fan pulley from the engine water pump assembly.


Hide 16572D 9.DISCONNECT NO. 2 RADIATOR HOSE

a.
A337040

Slide the hose clamp and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 16400 10.REMOVE RADIATOR ASSEMBLY

a.
A346043

Remove the 4 bolts.


b.
A341292

Detach the 2 claws and 2 guides to disconnect the cooler condenser assembly from the radiator assembly.

NOTICE:
·

Do not allow the radiator assembly to interfere with other parts.

·

Do not apply any excessive force to the cooler condenser assembly and cooler pipe.




c.

Remove the radiator assembly from the vehicle.


Hide 16400B 11.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug from the radiator assembly.


b.

Remove the O-ring from the radiator drain cock plug.