15121
1.INSTALL OIL PUMP DRIVE GEAR
Place the timing belt case sub-assembly on wooden blocks.
Do not damage the timing pointer.
| *a | Mark |
Insert the oil pump drive gear and oil pump driven gear into the timing belt case sub-assembly with the marks facing the oil pump cover side.
15115
2.INSTALL OIL PUMP COVER
Apply adhesive to 2 or 3 threads of the screws.
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
Install the oil pump cover to the timing belt case sub-assembly with the 8 screws.
15131
3.INSTALL OIL PUMP RELIEF VALVE
Insert the oil pump relief valve and oil pump relief valve spring into the installation hole of the timing belt case sub-assembly.
Using a 12 mm hexagon wrench, install a new gasket and the oil pump relief valve plug.