Home › Drivetrain › AC60E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › from 2016.01
RM3270E _52 Drivetrain _048959 AC60E AUTOMATIC TRANSMISSION / TRANSAXLE _0239368 PARK / NEUTRAL POSITION SWITCH A

AC60E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 35979B 1.REMOVE TRANSMISSION INSULATOR RH

Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C323971

Disconnect the park/neutral position switch connector.


b.
C323972

Using a screwdriver, pry out the lock washer.


c.

Remove the nut and lock washer.


d.

Remove the bolt and park/neutral position switch from the automatic transmission assembly.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.