DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM, or the input VIN is incorrect. The VIN is input with the GTS.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P0630 | VIN Not Programmed or Incompatible - ECM/PCM | Either condition is met (1 trip detection logic):
·
VIN is not stored in the ECM. ·
Input VIN is incorrect. |
ECM | Comes on | DTC stored |
| DTC No. | DTC Detection Drive Pattern |
| P0630 | Ignition switch ON for 5 seconds or more |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read DTCs.
| Result | Proceed to |
|---|---|
| DTC P0630 is output | A |
| DTC P0630 and other DTCs are output | B |
If P0630 is stored, the VIN must be input to the ECM using the GTS. However, DTCs are cleared automatically by the GTS when the VIN is input. If DTCs other than P0630 are output, troubleshoot those DTCs first.
A
B
Refer to the Registration.
Click hereEngine / Hybrid System>5L-E ENGINE CONTROL>ECD SYSTEM>REGISTRATION
| Proceed to |
|---|
| NEXT |
NEXT