Home › Engine / Hybrid System › 5L-E ENGINE CONTROL › ECD SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _048946 5L-E ENGINE CONTROL _0236357 ECD SYSTEM D

5L-E ENGINE CONTROL  ECD SYSTEM  CHECK FOR INTERMITTENT PROBLEMS  


Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

2.

Switch the ECM from normal mode to check mode using the GTS.

Click hereEngine / Hybrid System>5L-E ENGINE CONTROL>ECD SYSTEM>CHECK MODE PROCEDURE

3.

Perform a simulation test.

4.

Check and wiggle the harness(es), connector(s) and terminal(s).

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>ELECTRONIC CIRCUIT INSPECTION PROCEDURE