Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › MASS AIR FLOW METER › from 2016.01
RM3270E _51 Engine / Hybrid System _048938 2TR-FE ENGINE CONTROL _0241359 MASS AIR FLOW METER G

2TR-FE ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

a.

Read the value using the GTS (MAF).

NOTICE:

Perform the inspection of the intake mass air flow meter sub-assembly while it is installed to the air cleaner cap sub-assembly (installed to the vehicle).


i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine / Data List / MAF.

Powertrain > Engine > Data List
Tester Display
MAF
50003 234 3

v.

Wait 30 seconds, and then read the value on the GTS.

Standard Condition:
GTS Display Condition Specified Condition
MAF Idling 2.0 to 6.0 gm/sec
2000 rpm 7.0 to 11.0 gm/sec
3000 rpm 11.0 to 17.0 gm/sec


If the result is not as specified, replace the intake mass air flow meter sub-assembly.

If the result is within the specified range, inspect the intake mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>MASS AIR FLOW METER>INSPECTION