1.DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
77704
4.REMOVE CHARCOAL CANISTER SUB-ASSEMBLY
23801P
5.DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
Detach the No. 1 fuel pipe sub-assembly from the fuel filter assembly.
Disconnect the No. 1 fuel pipe sub-assembly from the fuel filter assembly.
Click hereEngine / Hybrid System>1GR-FE FUEL>FUEL SYSTEM>PRECAUTION
77251B
6.DISCONNECT FUEL MAIN TUBE
Disconnect the fuel main tube from the fuel filter assembly.
Click hereEngine / Hybrid System>1GR-FE FUEL>FUEL SYSTEM>PRECAUTION
23300
7.REMOVE FUEL FILTER ASSEMBLY
Remove the 3 nuts and fuel filter assembly.
23300
8.INSTALL FUEL FILTER ASSEMBLY
Install the fuel filter assembly with the 3 nuts.
77251B
9.CONNECT FUEL MAIN TUBE
Connect the fuel main tube to the fuel filter assembly.
Click hereEngine / Hybrid System>1GR-FE FUEL>FUEL SYSTEM>PRECAUTION
23801P
10.CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
Connect the No. 1 fuel pipe sub-assembly to the fuel filter assembly.
Click hereEngine / Hybrid System>1GR-FE FUEL>FUEL SYSTEM>PRECAUTION
Attach the No. 1 fuel pipe sub-assembly to the fuel filter assembly.
77704
11.INSTALL CHARCOAL CANISTER SUB-ASSEMBLY
12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
13.INSPECT FOR FUEL LEAK