Home › General › SPECIFICATIONS › 2KD-FTV FUEL › from 2016.01
RM3270E _V1 General _041724 SPECIFICATIONS _0242341 2KD-FTV FUEL F

SPECIFICATIONS  2KD-FTV FUEL  SERVICE DATA  


FUEL INJECTOR
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.42 to 0.52 Ω

FUEL SUPPLY PUMP
Item Tester Connection Condition Specified Condition
Suction control valve 1 - 2 20°C (68°F) 1.9 to 2.3 Ω
Fuel temperature sensor 1 - 2 20°C (68°F) 2.32 to 2.59 kΩ

COMMON RAIL
Item Tester Connection Condition Specified Condition
Fuel pressure sensor 2 - 3 25°C (77°F) 16.4 kΩ or less
5 - 4 25°C (77°F) 16.4 kΩ or less
1 - 2 25°C (77°F) 3 kΩ or less
6 - 5 25°C (77°F) 3 kΩ or less
Pressure discharge valve 1 - 2 20°C (68°F) 0.85 to 1.05 Ω

FUEL FILTER
Item Tester Connection Condition Specified Condition
Level warning switch 3 - 4 Float at upper end position Below 1 Ω
Float at lower end position 10 kΩ or higher
Clogging switch 1 - 2 20°C (68°F) Below 1 Ω

FUEL SENDER GAUGE ASSEMBLY
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 4.25 to 4.61 V*
Float position is E (lower) 0.34 to 0.70 V*

*: The output voltage changes depending on the voltage applied to the terminals.