Home › Engine / Hybrid System › 2GD-FTV ENGINE MECHANICAL › DRIVE BELT › from 2016.01
RM3270E _51 Engine / Hybrid System _048923 2GD-FTV ENGINE MECHANICAL _0242424 DRIVE BELT A

2GD-FTV ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

a.
A369938C01
1.656,3.729 2.073,3.729 true 1,4.052 1,4.302 true 2.094,3.625 2.323,3.792 0.229,0.167 10 true *a 0.938,4.323 1.167,4.49 0.229,0.167 10 true *b
*a Service Hole
*b Pin


While turning the V-ribbed belt tensioner assembly clockwise, align the service holes of the V-ribbed belt tensioner assembly, and then insert a pin with a diameter of 5.0 mm (0.197 in.) into the service holes to fix the V-ribbed belt tensioner assembly in place.


b.

Remove the fan and generator V belt.