Home › Engine / Hybrid System › 2GD-FTV ENGINE MECHANICAL › DRIVE BELT › from 2016.01
RM3270E _51 Engine / Hybrid System _048923 2GD-FTV ENGINE MECHANICAL _0242424 DRIVE BELT A

2GD-FTV ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Set the fan and generator V belt onto each part.

HINT:

When installing the fan and generator V belt, attach the fan and generator V belt to the No. 1 idler pulley sub-assembly last.



b.

While turning the V-ribbed belt tensioner assembly clockwise, remove the pin.


c.

Check that the fan and generator V belt fits properly in the ribbed grooves.

NOTICE:

Make sure that the fan and generator V belt is set properly on each pulley.