16400
1.REMOVE RADIATOR ASSEMBLY
13408
2.REMOVE CRANKSHAFT PULLEY SUB-ASSEMBLY
| *a | Hold |
|
Turn |
Using SST, hold the crankshaft pulley sub-assembly and loosen the crankshaft pulley bolt.
Make sure to leave the pulley bolt screwed into the crankshaft by 2 or 3 threads.
| *a | Hold |
|
Turn |
Using SST, remove the crankshaft pulley bolt and crankshaft pulley sub-assembly from the crankshaft.
11303A
3.REMOVE FRONT CRANKSHAFT OIL SEAL
Using SST, remove the front crankshaft oil seal from the timing gear cover.
After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.