Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › CYLINDER HEAD › from 2016.01
RM3270E _51 Engine / Hybrid System _048939 2TR-FE ENGINE MECHANICAL _0242513 CYLINDER HEAD A

2TR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the cylinder head removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Replacement of cylinder head sub-assembly Inspection after repair Poor idle, engine start, etc. (Click here)

PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A333831N01
1.583,0.333 1.708,0.333 1.708,0.333 1.823,0.708 true 1.25,0.24 1.573,0.427 0.323,0.188 10 false SST

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A333832N01
0.635,0.417 0.771,0.208 0.771,0.208 0.979,0.208 false 1.031,0.115 1.354,0.302 0.323,0.188 10 false SST

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711A 3.REMOVE VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the 16 valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.

Remove the 16 valve spring seats from the cylinder head sub-assembly.


Hide 11117E 5.REMOVE NO. 1 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101373

If coolant leaks from the No. 1 head straight screw plug or the plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, remove the 3 No. 1 head straight screw plugs and 3 gaskets.


Hide 11117F 6.REMOVE NO. 2 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101374

If coolant leaks from the No. 2 head straight screw plug or the plug is corroded, replace it.


a.

Using a 19 mm hexagon wrench, remove the No. 2 head straight screw plug and gasket.


Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.