Home › Engine / Hybrid System › 2TR-FE LUBRICATION › OIL PUMP › from 2016.01
RM3270E _51 Engine / Hybrid System _048944 2TR-FE LUBRICATION _0242526 OIL PUMP A

2TR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP ROTOR SET

a.
A336805C01
1.302,0.802 0.438,1.542 0.438,1.542 1.167,0.688 true 0.271,1.469 0.469,1.688 0.198,0.219 10 false *a
*a Alignment Mark


Coat the oil pump rotor set with engine oil and place it into the oil pump body with the marks facing outward (oil pump cover side). Check that the oil pump rotor set revolves smoothly.


Hide 2.INSTALL OIL PUMP COVER

a.

Install the oil pump cover to the timing chain cover sub-assembly with the 2 bolts and 6 screws.

Torque:
for bolt : 8.9 N*m (91 kgf*cm, 79 in.*lbf)
for screw : 10.3 N*m (105 kgf*cm, 8 ft.*lbf)


Hide 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil.


b.

Insert the oil pump relief valve and oil pump relief valve spring into the oil pump relief valve hole.


c.

Install a new gasket to the oil pump relief valve plug.


d.

Using a 27 mm socket wrench, install the oil pump relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)