Home › Engine / Hybrid System › 2KD-FTV ENGINE MECHANICAL › CYLINDER HEAD › from 2016.01
RM3270E _51 Engine / Hybrid System _048931 2KD-FTV ENGINE MECHANICAL _0243274 CYLINDER HEAD A

2KD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A060282N04
2.844,0.438 2.229,0.729 true 2.875,0.354 3.208,0.542 0.333,0.188 10 false SST

Using SST, compress the inner compression spring and remove the 2 valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the valve spring retainer, inner compression spring, intake valve and valve spring seat from the cylinder head sub-assembly.

HINT:

Arrange the intake valves, inner compression springs, valve spring seats and valve spring retainers in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A060276N04
2.771,0.219 2.229,0.375 true 2.823,0.146 3.177,0.313 0.354,0.167 10 false SST

Using SST, compress the inner compression spring and remove the 2 valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the valve spring retainer, inner compression spring, exhaust valve and valve spring seat from the cylinder head sub-assembly.

HINT:

Arrange the exhaust valves, inner compression springs, valve spring seats and valve spring retainers in the correct order.



Hide 13711E 3.REMOVE INTAKE VALVE STEM OIL SEAL

a.
A058955

Using needle-nose pliers, remove the intake valve stem oil seal from the valve guide bush.


Hide 13715A 4.REMOVE EXHAUST VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the exhaust valve stem oil seal from the valve guide bush.


Hide 11183 5.REMOVE SEMICIRCULAR PLUG

a.

Remove the semicircular plug from the cylinder head sub-assembly.


Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG

HINT:

If the No. 1 straight screw plug is corroded, replace it.


a.

Using a 6 mm hexagon wrench, remove the 4 No. 1 straight screw plugs from the cylinder head sub-assembly.


Hide 7.REMOVE STUD BOLT

HINT:

If a stud bolt is deformed or its threads are damaged, replace it.


a.

Remove the stud bolts from the cylinder head sub-assembly.