Home › Engine / Hybrid System › 1KD-FTV INTAKE / EXHAUST › EXHAUST PIPE › from 2016.01
RM3270E _51 Engine / Hybrid System _048918 1KD-FTV INTAKE / EXHAUST _0243299 EXHAUST PIPE A

1KD-FTV INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
A356209

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

·

Wear protective gloves when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

CAUTION:
·

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

·

Wear protective gloves when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the tailpipe assembly from the front exhaust pipe assembly and remove the gasket.


c.

Remove the tailpipe assembly from the 4 exhaust pipe supports.


Hide 17420 2.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the center exhaust pipe assembly from the front exhaust pipe assembly and remove the gasket.


c.

Remove the center exhaust pipe assembly from the 3 exhaust pipe supports.


Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

CAUTION:
·

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

·

Wear protective gloves when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the front exhaust pipe assembly from the turbine outlet elbow and remove the gasket.