Home › Engine / Hybrid System › 2GD-FTV LUBRICATION › ENGINE OIL COOLER › from 2016.01
RM3270E _51 Engine / Hybrid System _048928 2GD-FTV LUBRICATION _0243338 ENGINE OIL COOLER A

2GD-FTV LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15071 1.INSTALL ENGINE OIL COOLER SET

a.

Apply a light coat of engine oil to the 2 new O-rings.


b.

Install the 2 O-rings to the cylinder block sub-assembly.


c.

Install a new water outlet pipe gasket to the cylinder block sub-assembly.


d.

Install the engine oil cooler set to the cylinder block sub-assembly with the bolt and 5 nuts.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)