Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL PUMP › from 2016.01
RM3270E _51 Engine / Hybrid System _048940 2TR-FE FUEL _0243344 FUEL PUMP A

2TR-FE FUEL  FUEL PUMP  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2TR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 23220A 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.
A344552

Install the fuel pump harness and connect the fuel pump connector.


b.

Apply a light coat of gasoline to a new O-ring.


c.
A344554C01
2.885,0.281 3.01,0.281 3.01,0.281 3.104,0.521 false 2.708,1 3.021,1 true 2.083,1.115 2.365,1.115 true 3.052,0.927 3.24,1.115 0.188,0.188 10 true *1 1.938,1.042 2.115,1.229 0.177,0.188 10 true *2 2.719,0.188 2.906,0.385 0.188,0.198 10 false *a
*1 O-Ring
*2 Spacer
*a Supporter


Install the O-ring and spacer to the supporter of the fuel pump as shown in the illustration.


d.
A344551

Attach the 3 claws to the claw holes and install the fuel pump and suction filter assembly.


Hide 2.INSTALL NO. 1 FUEL SUB-TANK

a.
A344550

Attach the 2 claws to the claw holes and install the No. 1 fuel sub-tank.


b.
A344549

Attach the 3 claws to the claw holes.


c.
A344548

Connect the fuel tube and wire harness.


d.
A344547

Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the No. 1 fuel sub-tank.


e.
A344546

Connect the fuel pump connector and wire harness.


Hide 83320 3.INSTALL FUEL SENDER GAUGE ASSEMBLY