Home › Engine / Hybrid System › 5L-E STARTING › STARTER › from 2016.01
RM3270E _51 Engine / Hybrid System _048957 5L-E STARTING _0243358 STARTER A

5L-E STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28139 1.REMOVE STARTER LEAD WIRE

a.

Remove the screw and starter lead wire.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
B000461

Remove the nut and disconnect the lead wire from terminal C.


b.

Remove the 2 bolts and O-ring, and pull out the starter yoke assembly together with the starter armature assembly.


c.

Remove the 2 O-rings from the 2 bolts.


Hide 28150 3.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
B000465

Remove the 2 screws and magnet starter switch assembly.


b.

Remove the return spring.


c.
B000464C01
0.917,0.927 0.688,0.729 false 2.281,1.906 2.052,1.708 false 1.823,1.948 1.594,1.75 false 1,1.688 0.656,1.521 false 0.698,1.875 0.427,1.875 false 0.51,0.646 0.823,0.844 0.313,0.198 10 false *1 2.323,1.854 2.635,2.052 0.313,0.198 10 false *2 1.885,1.896 2.198,2.094 0.313,0.198 10 false *3 0.479,1.427 0.792,1.625 0.313,0.198 10 false *4 0.26,1.802 0.573,2 0.313,0.198 10 false *5
*1 Starter Clutch Sub-assembly
*2 Starter Armature Pinion
*3 Starter Idler Pinion
*4 Retainer
*5 Clutch Roller


Remove the starter clutch sub-assembly, starter armature pinion, starter idler pinion, retainer and clutch roller from the starter drive housing.


d.
A115020C13
2.677,0.417 2.563,0.417 2.563,0.417 2.135,0.74 false 2.76,0.323 3.042,0.51 0.281,0.188 10 false *a
*a Magnet Hand


Using a magnet hand, remove the steel ball from the hole of the clutch shaft.


Hide 28140 4.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
N000562

Disconnect the 4 starter brushes from the starter brush holder assembly.

i.

Using a screwdriver, pull back the spring.


ii.

Disconnect the brush from the starter brush holder assembly.



b.

Remove the starter brush holder assembly from the starter yoke assembly.


Hide 28160 5.REMOVE STARTER ARMATURE ASSEMBLY

a.
P005488

Using a plastic-faced hammer, tap the end of the starter yoke assembly and remove the starter armature assembly.