Home › Engine / Hybrid System › 5L-E STARTING › STARTER › from 2016.01
RM3270E _51 Engine / Hybrid System _048957 5L-E STARTING _0243358 STARTER A

5L-E STARTING  STARTER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 53882K 3.REMOVE FRONT FENDER SEAL LH

a.

Remove the 6 clips and front fender seal LH.


Hide 28191 4.REMOVE STARTER STAY

a.
A377278

Remove the nut, 2 bolts and starter stay.


Hide 28100 5.REMOVE STARTER ASSEMBLY

a.
A118417

Remove the starter terminal cap.


b.

Disconnect the starter connector.


c.

Remove the nut and disconnect the starter wire.


d.
A377279

Remove the nut, 2 bolts and starter assembly and disconnect the ground cable.