Home › Engine / Hybrid System › 2TR-FE INTAKE / EXHAUST › INTAKE SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _048942 2TR-FE INTAKE / EXHAUST _0243432 INTAKE SYSTEM G

2TR-FE INTAKE / EXHAUST  INTAKE SYSTEM  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the air leaks from intake system removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Air leaks from intake system Inspection after repair Poor idle, engine start, etc. (Click here)

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.


PROCEDURE

Hide 1.INSPECT INTAKE SYSTEM

CAUTION:

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.


HINT:

Perform "Inspection After Repair" after repairing air leaks in the intake system.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.

for RHD:

Check that there is no air suction at the points shown in the illustration.

A349277C01
0.156,0.135 0.427,0.344 0.271,0.208 10 true *A
*A w/ Secondary Air Injection System - -



b.

for LHD:

Check that there is no air suction at the points shown in the illustration.

A345961C02
0.156,0.156 0.385,0.323 0.229,0.167 10 true *A
*A w/ Secondary Air Injection System - -