28559A
1.INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET
Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.
28559
2.INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET
Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.
28551
3.INSTALL GLOW PLUG CONTROLLER
for LHD:
Install the glow plug controller with the 2 bolts.
for RHD:
Install the glow plug controller with the bolt.
Connect the 4 connectors and attach the clamp.
4.CONNECT CABLE TO BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION