Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
83910G
1.INSTALL CLOCK ASSEMBLY
Attach the claw to install the clock assembly.
Install the screw.
55670A
2.INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
55844
3.INSTALL NO. 2 HEATER TO REGISTER DUCT
55085
4.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55084E
5.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55950G
6.INSTALL DEFROSTER NOZZLE ASSEMBLY
55302A
7.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
9.CHECK SRS WARNING LIGHT