15710
1.INSTALL OIL COOLER ASSEMBLY
Clean the contact surfaces of the oil filter bracket sub-assembly and oil cooler assembly.
Place a new O-ring on the oil cooler assembly.
Apply a light coat of engine oil to the threads of the union bolt.
| *a | Protrusion |
| *b | Cutout |
Align the protrusion of the oil filter bracket sub-assembly with the cutout of the oil cooler assembly.
Install the oil cooler assembly and plate washer with the union bolt.
Connect the 2 oil cooler hoses to the oil cooler assembly and slide the 2 hose clamps to secure the hoses.
15601
2.INSTALL OIL FILTER SUB-ASSEMBLY
3.ADD ENGINE OIL
4.ADD ENGINE COOLANT
5.INSPECT FOR OIL LEAK
6.INSPECT FOR COOLANT LEAK