Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT AXLE HUB › from 2016.01
RM3270E _52 Drivetrain _041686 AXLE AND DIFFERENTIAL _0195329 FRONT AXLE HUB A

AXLE AND DIFFERENTIAL  FRONT AXLE HUB  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 89543 2.DISCONNECT FRONT SPEED SENSOR LH

Hide 47750 3.DISCONNECT FRONT DISC BRAKE CYLINDER ASSEMBLY LH

Hide 43512 4.REMOVE FRONT DISC

Hide 43514C 5.REMOVE FRONT AXLE HUB GREASE CAP LH (for 4WD)

C324910

a.

Using a screwdriver and hammer, remove the front axle hub grease cap LH.

NOTICE:

Do not damage the front axle hub.



Hide 43502H 6.REMOVE FRONT AXLE SHAFT NUT LH (for 4WD)

C324911

a.

Remove the cotter pin and lock cap.


b.

Using a 35 mm socket wrench, remove the axle shaft nut LH.


Hide 43502C 7.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH (for 4WD)

C324912

a.

Remove the 4 bolts, dust cover and front axle hub sub-assembly LH from the steering knuckle LH.


b.

Remove the O-ring from the front axle hub sub-assembly LH.


Hide 43502C 8.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH (for Pre-Runner)

a.
C324913

Remove the 4 bolts, dust cover and front axle hub sub-assembly LH from the steering knuckle LH.


b.

Remove the O-ring from the front axle hub sub-assembly LH.


Hide 43502M 9.REMOVE FRONT AXLE HUB INNER BEARING LH (for 4WD)

a.
C324914N01
1.448,0.667 2.198,0.667 2.198,0.667 1.052,1.208 true 2.292,0.594 2.75,0.792 0.458,0.198 10 false SST

Fix the front axle hub sub-assembly LH in a soft vise.


b.

Using SST, remove the front axle hub inner bearing LH.

SST
09710-30021  (09710-03051)
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)


Hide 43502M 10.REMOVE FRONT AXLE HUB INNER BEARING LH (for Pre-Runner)

a.
C324915N01
0.802,0.458 1.375,0.708 false 0.448,0.344 0.906,0.542 0.458,0.198 10 false SST

Using SST and a hammer, unstake the adjusting nut.

SST
09930-00010  


b.
C324916N01
1.125,2.448 0.563,2.052 true 0.229,1.948 0.688,2.146 0.458,0.198 10 false SST

Using SST, remove the adjusting nut.

SST
09607-26010  


c.
C324914N01
1.448,0.667 2.198,0.667 2.198,0.667 1.052,1.208 true 2.292,0.594 2.75,0.792 0.458,0.198 10 false SST

Fix the front axle hub in a soft vise.


d.

Using SST, remove the front axle hub inner bearing LH.

SST
09710-30021  (09710-03051)
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)


Hide 43502F 11.REMOVE FRONT AXLE HUB OIL SEAL LH

a.
C325045

Using a screwdriver, pry out the front axle hub oil seal LH.


Hide 12.REMOVE PLUG (for Pre-Runner)

a.
C221065

Using a screwdriver and hammer, remove the plug.