29366
1.REMOVE VACUUM PUMP PULLEY
Using soft jaws, place the vacuum pump in a vise, and remove the pulley lock nut and vacuum pump pulley.
29300F
2.REMOVE VACUUM PUMP VACUUM HOSE UNION
Using SST, hold the check valve sub-assembly, and remove the union bolt, vacuum pump vacuum hose union and 2 gaskets.
29369
3.REMOVE CHECK VALVE SUB-ASSEMBLY
Remove the check valve sub-assembly and gasket.
4.REMOVE VACUUM PUMP END COVER
Remove the 4 screws and vacuum pump end cover.
29336
5.REMOVE VACUUM PUMP SHAFT
Using a plastic-faced hammer, tap out the vacuum pump shaft with vacuum pump bearing.
29314
6.REMOVE STOP RING
Remove the stop ring from the vacuum pump shaft.
29322B
7.REMOVE VACUUM PUMP BEARING
Using a press, press out the vacauum pump bearing from the vacuum pump shaft.
29331
8.REMOVE VACUUM PUMP BLADE
Remove the 2 secrews and end plate.
Remove the vacuum pump rotor and 5 vacuum pump blades.
29342B
9.REMOVE O-RING
Remove the O-ring from the vacuum pump case.
29341A
10.REMOVE OIL SEAL
using a screwdriver, remove the oil seal.