Home › Drivetrain › RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSMISSION SYSTEM › from 2016.01
RM3270E _52 Drivetrain _048961 RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE _0242079 MANUAL TRANSMISSION SYSTEM U

RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION SYSTEM  TERMINALS OF ECM  


ECM


A340466E18
0.531,0.438 0.969,0.677 0.438,0.24 1.74,0.438 2.177,0.677 0.438,0.24 2.844,0.438 3.281,0.677 0.438,0.24 3.885,0.438 4.323,0.677 0.438,0.24 5,0.438 5.438,0.677 0.438,0.24 6.156,0.438 6.594,0.677 0.438,0.24 1.844,0.469 2.271,0.708 0.427,0.24 10 false C39 0.635,0.469 1.042,0.708 0.406,0.24 10 false C38 2.938,0.469 3.385,0.698 0.448,0.229 10 false C40 3.99,0.469 4.375,0.698 0.385,0.229 10 false C41 5.083,0.469 5.51,0.688 0.427,0.219 10 false G49 6.25,0.469 6.708,0.719 0.458,0.25 10 false G50

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C40-12 (NIMB) - C41-1 (E1) B - W-B Power supply for transmission revolution sensor Ignition switch ON 11 to 14 V
C40-13 (NIMO) - C41-1 (E1) W - W-B Transmission revolution sensor signal Engine idling and clutch pedal fully released Pulse generation
G49-8 (MTMS) - C41-1 (E1) B - W-B iMT switch signal Ignition switch ON and iMT switch pushed Below 1.5 V
Ignition switch ON and iMT switch not pushed 11 to 14 V
G49-17 (CANH) - C41-1 (E1) B - W-B CAN communication line Ignition switch ON Pulse generation
G49-28 (CANL) - C41-1 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
G50-20 (CLS) - G50-21 (E2CL) SB - R Clutch stroke sensor signal Ignition switch ON and clutch pedal fully released 0.2 to 1.5 V
Ignition switch ON and clutch pedal fully depressed 2.5 to 4.8 V
G50-23 (VCCL) - C41-1 (E1) G - W-B Power supply for clutch stroke sensor Ignition switch ON 4.5 to 5.5 V