Home › Engine / Hybrid System › 1GR-FE STARTING › STARTER › from 2016.01
RM3270E _51 Engine / Hybrid System _048953 1GR-FE STARTING _0244657 STARTER A

1GR-FE STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A341237

Remove the nut and disconnect the lead wire from the terminal C.


b.

Remove the 2 bolts.


c.

Pull out the starter yoke and starter commutator end frame together with the starter armature.


d.

Remove the O-ring from the starter yoke assembly.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A341238

Remove the 2 screws and magnet starter switch assembly.


b.
A341239C01
1.531,0.75 1.531,0.333 1.531,0.333 1.365,0.333 false 1.115,0.927 1.115,0.51 1.115,0.51 0.948,0.51 false 0.719,1.073 0.719,0.823 0.719,0.823 0.552,0.823 false 0.625,1.813 0.625,1.563 0.625,1.563 0.458,1.563 false 1.75,1.823 1.917,1.99 1.917,1.99 2.083,1.99 false 2.625,0.552 2.792,0.385 2.792,0.385 2.958,0.385 false 1.198,0.25 1.51,0.448 0.313,0.198 10 false *1 0.771,0.427 1.083,0.625 0.313,0.198 10 false *2 0.375,0.74 0.688,0.938 0.313,0.198 10 false *3 0.271,1.469 0.583,1.667 0.313,0.198 10 false *4 2.125,1.917 2.438,2.115 0.313,0.198 10 false *5 3.01,0.313 3.323,0.51 0.313,0.198 10 false *6
*1 Idle Gear
*2 Retainer
*3 Clutch Roller
*4 Return Spring
*5 Starter Clutch Sub-assembly
*6 Starter Drive Housing Assembly


Remove the idle gear, retainer, clutch roller, return spring and starter clutch sub-assembly from the starter drive housing assembly.


c.
A115020C12
2.146,0.885 1.906,1.021 1.906,1.021 1.906,1.667 false 1.823,1.688 2.135,1.958 0.313,0.271 10 false *a
*a Magnet Hand


Using a magnet hand, remove the steel ball from the starter clutch hole.


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A341240

Remove the 2 screws and starter commutator end frame assembly from the starter yoke assembly.

NOTICE:

While holding down the lead wire, remove the starter commutator end frame assembly.



b.

Remove the O-ring from the starter yoke. assembly


c.
A215926

Disconnect the 4 brushes from the starter brush holder assembly.

i.

Using a screwdriver, hold back the spring.


ii.

Disconnect the brush from the starter brush holder assembly.



d.

Remove the starter brush holder assembly.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.

Remove the starter armature assembly from the starter yoke assembly.