Home › Engine / Hybrid System › 2KD-FTV STARTING › GLOW PLUG › from 2016.01
RM3270E _51 Engine / Hybrid System _048937 2KD-FTV STARTING _0244700 GLOW PLUG A

2KD-FTV STARTING  GLOW PLUG  INSTALLATION  


PROCEDURE

Hide 19850 1.INSTALL GLOW PLUG ASSEMBLY

a.

Using a 12 mm deep socket wrench, install the 4 glow plug assemblies.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 19871 2.INSTALL NO. 1 GLOW PLUG CONNECTOR

a.

Install the glow plug connector by uniformly tightening the 4 nuts.

Torque:
2.2 N*m (22 kgf*cm, 19 in.*lbf)


b.

Install the 4 screw grommets.


c.

Install the wire harness with the nut.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


d.

Install the screw grommet.


Hide 17873A 4.INSTALL NO. 2 INTAKE AIR CONNECTOR BRACKET

Hide 25861C 5.INSTALL VACUUM SWITCHING VALVE BRACKET

Hide 26100G 6.INSTALL DIESEL THROTTLE BODY ASSEMBLY