Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _041679 CRUISE CONTROL _0199359 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK ECM (for 1GR-FE)


A225776E28
0.625,0.427 1.052,0.646 0.427,0.219 1.625,0.448 2.052,0.667 0.427,0.219 3.125,0.438 3.552,0.656 0.427,0.219 4.115,0.448 4.542,0.667 0.427,0.219 5.115,0.448 5.542,0.667 0.427,0.219 6.219,0.427 6.646,0.646 0.427,0.219 0.667,0.448 1.042,0.677 0.375,0.229 10 false G144 1.667,0.458 2.042,0.688 0.375,0.229 10 false G145 3.219,0.469 3.594,0.698 0.375,0.229 10 false C85 4.219,0.479 4.594,0.708 0.375,0.229 10 false C84 5.208,0.479 5.583,0.708 0.375,0.229 10 false C83 6.302,0.469 6.677,0.698 0.375,0.229 10 false C82

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C83-12 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
C85-22 (D) - C83-12 (E1) GR - BR D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
G144-24 (BATT) - C83-12 (E1) Y - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G145-9 (SFTD) - C83-12 (E1) G - BR Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)
G145-15 (SFTU) - C83-12 (E1) W - BR Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)
G145-22 (S) - C83-12 (E1) L - BR S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G145-1 (CCS) - C83-12 (E1) G - BR Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G145-34 (ST1-) - C83-12 (E1) GR - BR Stop light switch assembly signal (opposite of voltage at STP terminal) Ignition switch ON,
brake pedal depressed
Below 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G145-35 (STP) - C83-12 (E1) L - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V


CHECK ECM (for 2TR-FE)


A347038C13
1,2.167 1.5,2.417 0.5,0.25 2.5,2.167 3,2.417 0.5,0.25 4.167,2.167 4.667,2.417 0.5,0.25 5.583,2.167 6.083,2.417 0.5,0.25 0.667,0.313 1.167,0.583 0.5,0.271 1.917,0.323 2.417,0.583 0.5,0.26 3.417,0.344 3.917,0.583 0.5,0.24 4.75,0.313 5.26,0.583 0.51,0.271 6.083,0.323 6.563,0.583 0.479,0.26 0.073,0.208 0.385,0.406 0.313,0.198 12 false *A 0.094,2.063 0.406,2.26 0.313,0.198 12 false *B 0.729,0.365 1.188,0.563 0.458,0.198 10 false C146 1.99,0.365 2.448,0.563 0.458,0.198 10 false C147 3.51,0.385 3.969,0.583 0.458,0.198 10 false C148 4.833,0.365 5.292,0.563 0.458,0.198 10 false G142 6.146,0.365 6.604,0.563 0.458,0.198 10 false G143 1.083,2.208 1.542,2.406 0.458,0.198 10 false C146 2.583,2.208 3.042,2.406 0.458,0.198 10 false C147 4.26,2.208 4.719,2.406 0.458,0.198 10 false G142 5.656,2.208 6.115,2.406 0.458,0.198 10 false G143
*A for Automatic Transmission *B for Manual Transmission


HINT:

The standard voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage for that pair of terminals, displayed in the "Specified Condition" column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C146-3 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
C148-17 (SFTU) - C146-3 (E1)*2 W - W-B Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)*3
C148-27 (SFTD) - C146-3 (E1)*2 G - W-B Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)*3
C148-30 (S) - C146-3 (E1)*2 L - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G142-18 (D) - C146-3 (E1) P - W-B Clutch switch signal*1 Ignition switch ON, clutch pedal depressed Below 1 V
Ignition switch ON, clutch pedal released 11 to 14 V
D shift position signal*2 Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
G142-22 (CCS) - G142-21 (ECCS) G - BR Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G143-3 (BATT) - C146-3 (E1) Y - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G143-10 (STP) - C146-3 (E1) L - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
G143-11 (ST1-) - C146-3 (E1) GR - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
Below 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V

*1: for Manual Transmission

*2: for Automatic Transmission

*3: w/ Transmission Shift Switch Assembly



CHECK ECM (for 1GD-FTV, 2GD-FTV)


A340466E26
0.531,0.438 0.969,0.677 0.438,0.24 1.74,0.438 2.177,0.677 0.438,0.24 2.844,0.438 3.281,0.677 0.438,0.24 3.885,0.438 4.323,0.677 0.438,0.24 5,0.438 5.438,0.677 0.438,0.24 6.156,0.438 6.594,0.677 0.438,0.24 1.844,0.469 2.156,0.667 0.313,0.198 10 false C39 0.635,0.469 0.948,0.667 0.313,0.198 10 false C38 2.938,0.469 3.25,0.667 0.313,0.198 10 false C40 3.99,0.469 4.302,0.667 0.313,0.198 10 false C41 5.083,0.469 5.396,0.667 0.313,0.198 10 false G49 6.25,0.469 6.563,0.667 0.313,0.198 10 false G50

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C38-14 (D) - C41-1 (E1) GR - W-B Clutch switch signal*1 Ignition switch ON, clutch pedal depressed Below 1 V
Ignition switch ON, clutch pedal released 11 to 14 V
D shift position signal*2 Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
C41-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G49-13 (S) - C41-1 (E1)*2 L - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G49-20 (SFTD) - C41-1 (E1)*2 G - W-B Down-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)*3
G49-21 (SFTU) - C41-1 (E1)*2 W - W-B Up-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)*3
G50-1 (BATT) - C41-1 (E1) Y - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G50-12 (ST1-) - C41-1 (E1) GR - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
0 to 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G50-13 (STP) - C41-1 (E1) L - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G50-26 (CCS) - C41-1 (E1) G - W-B Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω

*1: for Manual Transmission

*2: for Automatic Transmission

*3: w/ Transmission Shift Switch Assembly



CHECK ECM (for 1KD-FTV)


A254878E16
1.208,0.406 1.615,0.646 0.406,0.24 2.729,0.406 3.135,0.646 0.406,0.24 4.292,0.406 4.698,0.646 0.406,0.24 5.76,0.406 6.167,0.646 0.406,0.24 1.25,0.448 1.635,0.625 0.385,0.177 10 false C114 2.771,0.448 3.135,0.635 0.365,0.188 10 false C115 4.333,0.448 4.729,0.615 0.396,0.167 10 false G140 5.802,0.448 6.167,0.625 0.365,0.177 10 false G141

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C115-7 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G140-2 (BATT) - C115-7 (E1) Y - W-B Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G140-14 (ST1-) - C115-7 (E1) GR - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
0 to 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G140-15 (STP) - C115-7 (E1) L - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G141-21 (CCS) - C115-7 (E1) G - W-B Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω


CHECK TCM (for 1KD-FTV)


C214981E16
1.479,0.208 1.854,0.427 0.375,0.219 3.49,0.208 3.865,0.427 0.375,0.219 5.458,0.208 5.833,0.427 0.375,0.219 1.51,0.24 1.854,0.417 0.344,0.177 10 false C116 3.51,0.24 4.042,0.417 0.531,0.177 10 false G146 5.469,0.24 5.854,0.417 0.385,0.177 10 false G147

HINT:

The standard voltage at each TCM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration below as a reference for the ECU terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G146-8 (D) - C116-1 (E1) P - W-B D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
C116-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G147-15 (S) - C116-1 (E1) L - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G147-22 (SFTU) - C116-1 (E1) W - W-B Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)
G147-23 (SFTD) - C116-1 (E1) G - W-B Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)