Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2016.01
RM3270E _58 Vehicle Interior _041715 INTERIOR PANELS / TRIM _0213631 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 63341 1.REMOVE NO. 1 ROOF SILENCER PAD

a.
B409938

Remove the 2 No. 1 roof silencer pads.


Hide 63342 2.REMOVE NO. 2 ROOF SILENCER PAD

a.
B409939

Remove the No. 2 roof silencer pad.


Hide 63343 3.REMOVE NO. 3 ROOF SILENCER PAD

a.
B409940

Remove the 2 No. 3 roof silencer pads.


Hide 63344 4.REMOVE NO. 4 ROOF SILENCER PAD

a.
B409941

Remove the No. 4 roof silencer pad.


Hide 63345 5.REMOVE NO. 5 ROOF SILENCER PAD

a.
B409942

Remove the No. 5 roof silencer pad.


Hide 63346 6.REMOVE NO. 6 ROOF SILENCER PAD

a.
B409943

Remove the No. 6 roof silencer pad.


Hide 63381 7.REMOVE FRONT HEADLINING RETAINER

a.
B409937

Remove the front headlining retainer.


Hide 62653F 8.REMOVE ROOF HEADLINING PACKING

a.
B409936

Remove the roof headlining packing.


Hide 87201B 9.REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

a.
B409944

Detach the clamp.


b.

Remove the No. 2 air duct sub-assembly.


Hide 87201 10.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY

a.
B409945

Remove the No. 1 air duct sub-assembly.


Hide 87201F 11.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY

a.
B409946

Remove the No. 3 air duct sub-assembly.


Hide 63610C 12.REMOVE NO. 1 AIR OUTLET REGISTER ASSEMBLY

HINT:

Use the same procedure for all No. 1 air outlet register assemblies.


a.
B409948

Detach the claw and remove the No. 1 air outlet register assembly.


Hide 81340 13.REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)

HINT:

Use the same procedure for both vanity light assemblies.


a.
B399718C03
1.417,0.698 1.552,0.396 false 1.156,1.688 1.292,1.25 true 0.583,0.615 0.979,0.896 true 2.688,1.417 2.948,1.531 true 0.396,0.5 0.708,0.656 0.313,0.156 10 false *1 1.042,1.698 1.354,1.854 0.313,0.156 10 false *a 2.99,1.51 3.302,1.667 0.313,0.156 10 false *b 1.49,0.24 1.802,0.396 0.313,0.156 10 false *a
*1 Bulb Holder
*a Claw A
*b Claw B


Detach claw A and separate the bulb holder from the vanity light assembly.


b.

Detach claw B and remove the vanity light assembly.


Hide 82171 14.REMOVE NO. 1 ROOF WIRE

a.

w/ Vanity Light:

i.
B364695

Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining assembly.



b.

Remove each piece of tape and the No. 1 roof wire from the roof headlining assembly.

B409951C01
0,0 0,0 false
V100155

Tape - -



Hide 86101J 15.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY