Home › Steering › POWER ASSIST SYSTEMS › DRIVE BELT(for 5L-E) › from 2016.01
RM3270E _55 Steering _041696 POWER ASSIST SYSTEMS _0245075 DRIVE BELT(for 5L-E) G

POWER ASSIST SYSTEMS  DRIVE BELT(for 5L-E)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. DRIVE BELT TENSION

a.
A074147C02
0.979,0.063 1.729,0.229 0.75,0.167 10 false *b 0.594,0.875 1.344,1.042 0.75,0.167 10 false *a 1.958,0.063 2.833,0.229 0.875,0.167 10 false *c
*a Clearance
*b Correct
*c Incorrect


Visually check the belt for cracks, oiliness or wear. Check that the belt does not touch the bottom of the pulley groove.If necessary, replace the belt.


b.
A121452C01
2.979,2.76 3.406,3.115 0.427,0.354 10 false *b 1.76,2.729 2.188,3.083 0.427,0.354 10 false *a
*a Crankshaft Pulley
*b Vane Pump Pulley
V100135

Measuring Point for Belt Deflection


Check the drive belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.

Standard Drive Belt Deflection
Item Specified Condition
New belt 7.5 to 9.5 mm (0.296 to 0.374 in.)
Used belt 9 to 13 mm (0.355 to 0.511 in.)

If necessary, adjust the drive belt deflection.


c.

Using a belt tension gauge, check the drive belt tension.

Standard Drive Belt Deflection
Item Specified Condition
New belt 441 to 539 N(45 to 55 kgf, 99.2 to 121 lbf)
Used belt 196 to 343 N(20 to 35 kgf, 44.1 to 77.1 lbf)

If the belt tension is not as specified, adjust it.