Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2016.01
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203210 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


PROCEDURE

Hide 75431A 1.INSTALL NO. 1 BACK DOOR EMBLEM

HINT:

When installing the No. 1 back door emblem, heat the vehicle body and No. 1 back door emblem using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 1 Back Door Emblem 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B410861C01
0.448,3.573 0.708,3.573 false 2.625,3.802 2.885,3.802 false 0.292,3.479 0.573,3.729 0.281,0.25 10 false *a 2.917,3.719 3.198,3.969 0.281,0.25 10 false *a
*a Boss


Install a new No. 1 back door emblem.

i.

Using a heat light, heat the vehicle body and a new No. 1 back door emblem.


ii.

Remove the peeling paper from the face of the No. 1 back door emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the No. 1 back door emblem.

HINT:

Press the No. 1 back door emblem firmly to install it.




Hide 75441B 2.INSTALL BACK DOOR NAME PLATE

HINT:

When installing the back door name plate, heat the back door outside garnish sub-assembly and back door name plate using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 40 to 60°C (104 to 140°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door name plate.

i.

Using a heat light, heat the back door outside garnish sub-assembly and a new back door name plate.


ii.

Remove the peeling paper from the face of the back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door name plate in the position shown in the illustration.

HINT:
·

The values in the illustration are reference values.

·

Press the back door name plate firmly to install it.



B421611C01
0.073,0.052 0.323,0.302 0.25,0.25 10 true *a 0.677,1.438 0.813,1.635 0.135,0.198 10 true A 1.167,0.885 1.302,1.083 0.135,0.198 10 true B 1.635,0.885 1.771,1.083 0.135,0.198 10 true C 1.833,0.885 1.969,1.083 0.135,0.198 10 true D 2.115,0.885 2.25,1.083 0.135,0.198 10 true E 2.552,0.885 2.688,1.083 0.135,0.198 10 true G 2.667,0.656 2.813,0.823 0.146,0.167 10 true F 2.854,0.917 2.969,1.083 0.115,0.167 10 true H 3.458,1.438 3.583,1.625 0.125,0.188 10 true J 3.646,1.438 3.771,1.625 0.125,0.188 10 true K 3.573,0.646 3.688,0.813 0.115,0.167 10 true I 4.25,0.667 4.375,0.813 0.125,0.146 10 true L 5.115,0.667 5.25,0.823 0.135,0.156 10 true O 5.667,0.656 5.802,0.813 0.135,0.156 10 true R 6.396,1.438 6.521,1.615 0.125,0.177 10 true U 5.792,1.427 5.917,1.625 0.125,0.198 10 true T 5.573,1.438 5.698,1.635 0.125,0.198 10 true S 5.083,1.427 5.208,1.625 0.125,0.198 10 true Q 4.854,1.427 4.979,1.625 0.125,0.198 10 true P 4.135,1.438 4.26,1.635 0.125,0.198 10 true M 4.354,1.458 4.479,1.656 0.125,0.198 10 true N 2.073,1.823 2.208,2.021 0.135,0.198 10 true W 1.375,1.844 1.51,2.042 0.135,0.198 10 true V 0.844,0.51 0.979,0.688 0.135,0.177 10 true X 6.208,0.521 6.344,0.698 0.135,0.177 10 true Y
*a Reference Values - -


Standard:
Area Specified Condition Area Specified Condition
A 19.0 mm (0.748 in.) B 19.2 mm (0.756 in.)
C 19.3 mm (0.760 in.) D 19.4 mm (0.764 in.)
E 19.4 mm (0.764 in.) F 81.3 to 83.3 mm (3.20 to 3.28 in.)
G 19.5 mm (0.768 in.) H 19.5 mm (0.768 in.)
I 42.8 to 44.8 mm (1.69 to 1.76 in.) J 19.5 mm (0.768 in.)
K 19.5 mm (0.768 in.) L 43.0 to 45.0 mm (1.69 to 1.77 in.)
M 19.5 mm (0.768 in.) N 19.5 mm (0.768 in.)
O 83.1 to 85.1 mm (3.27 to 3.35 in.) P 19.4 mm (0.764 in.)
Q 19.3 mm (0.760 in.) R 41.3 to 43.3 mm (1.63 to 1.70 in.)
S 19.2 mm (0.756 in.) T 19.2 mm (0.756 in.)
U 19.0 mm (0.748 in.) V 38.5 to 40.5 mm (1.52 to 1.59 in.)
W 41.2 to 43.2 mm (1.62 to 1.70 in.) X 11.3 mm (0.445 in.)
Y 14.4 mm (0.567 in.) - -




Hide 75459A 3.INSTALL BACK DOOR MARK

HINT:

When installing the back door mark, heat the vehicle body and back door mark using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Back Door Mark 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door mark.

B442437C01
1.74,0.813 1.74,0.563 1.74,0.563 2.073,0.563 true 1.385,2.719 1.385,2.469 1.385,2.469 1.719,2.469 true 5.281,0.823 5.281,0.573 5.281,0.573 5.615,0.573 true 0.135,0.063 0.448,0.26 0.313,0.198 10 false *a 1.708,2.375 2.021,2.573 0.313,0.198 10 true *b 2.031,0.469 2.344,0.667 0.313,0.198 10 true *b 5.604,0.469 5.917,0.667 0.313,0.198 10 true *b 0.656,2.76 0.813,2.958 0.156,0.198 10 true A 2.479,0.875 2.635,1.073 0.156,0.198 10 true A 1.219,0.875 1.375,1.073 0.156,0.198 10 true A 2.979,0.854 3.135,1.052 0.156,0.198 10 true A 4.771,0.875 4.927,1.073 0.156,0.198 10 true A 6.031,0.865 6.188,1.063 0.156,0.198 10 true A 1.927,2.771 2.083,2.969 0.156,0.198 10 true A 5.552,1.448 5.708,1.656 0.156,0.208 10 true B 1.656,3.333 1.813,3.531 0.156,0.198 10 true C 1.938,1.438 2.094,1.635 0.156,0.198 10 true B
*a Reference Values *b Back Door R End


i.

Using a heat light, heat the vehicle body and a new back door mark.


ii.

Remove the peeling paper from the face of the back door mark.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door mark in the position shown in the illustration.

HINT:
·

The values in the illustration are reference values.

·

Press the back door mark firmly to install it.



Standard:
Area Specified Condition Area Specified Condition
A 56.0 mm (2.20 in.) B 175.0 mm (6.89 in.)
C 263.0 mm (10.4 in.) - -




Hide 75442A 4.INSTALL NO. 2 BACK DOOR NAME PLATE

HINT:

When installing the No. 2 back door name plate, heat the vehicle body and No. 2 back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 2 Back Door Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B433659C01
2.167,0.917 2.167,0.667 2.167,0.667 2.417,0.667 false 1.51,0.958 1.667,1.156 0.156,0.198 10 true A 2.583,0.948 2.74,1.146 0.156,0.198 10 true A 0.156,0.115 0.354,0.313 0.198,0.198 10 true *a 2.406,0.583 2.625,0.76 0.219,0.177 10 true *b 2.208,1.615 2.365,1.813 0.156,0.198 10 true B
*a Reference Values
*b Back Door R End


Install a new No. 2 back door name plate.

i.

Using a heat light, heat the vehicle body and a new No. 2 back door name plate.


ii.

Remove the peeling paper from the face of the No. 2 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 2 back door name plate in the position shown in the illustration.

HINT:
·

The values in the illustration are reference values.

·

Press the No. 2 back door name plate firmly to install it.



Standard:
Area Specified Condition
A 56.0 mm (2.20 in.)
B 116.0 mm (4.57 in.)




Hide 75441E 5.INSTALL NO. 1 BACK DOOR NAME PLATE

HINT:

When installing the No. 1 back door name plate, heat the vehicle body and No. 1 back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 1 Back Door Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B433656C01
1.667,0.813 1.667,0.479 1.667,0.479 2.083,0.479 true 0.844,0.917 1,1.115 0.156,0.198 10 true A 2.417,0.917 2.573,1.115 0.156,0.198 10 true A 1.042,1.677 1.198,1.875 0.156,0.198 10 true B 0.125,0.083 0.417,0.281 0.292,0.198 10 true *a 2.094,0.417 2.406,0.573 0.313,0.156 10 true *b
*a Reference Values
*b Back Door R End


Install a new No. 1 door name plate.

i.

Using a heat light, heat the vehicle body and a new No. 1 door name plate.


ii.

Remove the peeling paper from the face of the No. 1 door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 1 door name plate in the position shown in the illustration.

HINT:
·

The values in the illustration are reference values.

·

Press the No. 1 door name plate firmly to install it.



Standard:
Area Specified Condition
A 54.0 mm (2.13 in.)
B 37.0 mm (1.46 in.)