Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2016.01
RM3270E _56 Audio / Visual / Telematics _041700 NAVIGATION / MULTI INFO DISPLAY _0197741 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B1550  DAB Tuner Malfunction  B15A0  LAN Master Malfunction  B15AD  Navigation Processor Malfunction  B15B0  Display Screen Malfunction  B15B3  Radio Tuner Malfunction  B15B4  CD Changer Malfunction  B15B5  DVD Changer Malfunction  B15B7  Bluetooth Module Malfunction  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation receiver assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1550 DAB Tuner Malfunction Digital radio tuner has a malfunction Navigation receiver assembly
B15A0 LAN Master Malfunction When one of the conditions below is met:
·

Bus malfunction

·

EEPROM error


Navigation receiver assembly
B15AD Navigation Processor Malfunction When one of the conditions below is met:
·

Short to ground or +B, or open occurs in gyro signal circuit

·

Gyro sensor malfunction

·

GPS receiver malfunction


Navigation receiver assembly
B15B0 Display Screen Malfunction Picture circuit (TFT unit) malfunction Navigation receiver assembly
B15B3 Radio Tuner Malfunction When one of the conditions below is met:
·

AM tuner PLL is unlocked

·

FM tuner PLL is unlocked

·

Tuner malfunction


Navigation receiver assembly
B15B4 CD Changer Malfunction When one of the conditions below is met:
·

Mechanical communication error

·

Load/Eject malfunction

·

Read malfunction

·

Mechanical malfunction


Navigation receiver assembly
B15B5 DVD Changer Malfunction When one of the conditions below is met:
·

Mechanical communication error

·

Load/Eject malfunction

·

Read malfunction

·

Mechanical malfunction


Navigation receiver assembly
B15B7 Bluetooth Module Malfunction "Bluetooth" module malfunction Navigation receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Check for DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG