Home › Engine / Hybrid System › 1GD-FTV STARTING › GLOW PLUG CONTROLLER › from 2016.01
RM3270E _51 Engine / Hybrid System _041678 1GD-FTV STARTING _0205078 GLOW PLUG CONTROLLER A

1GD-FTV STARTING  GLOW PLUG CONTROLLER  INSTALLATION  


PROCEDURE

Hide 28559A 1.INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET

a.

Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 28559 2.INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

a.

Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 28551 3.INSTALL GLOW PLUG CONTROLLER

a.

for LHD:

i.

Install the glow plug controller with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)



b.

for RHD:

i.

Install the glow plug controller with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)



c.

Connect the 4 connectors and attach the clamp.


Hide 4.CONNECT CABLE TO BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION