Home › Brake › BRAKE (REAR) › REAR BRAKE(for Rear Drum Brake) › from 2016.01
RM3270E _54 Brake _041694 BRAKE (REAR) _0248850 REAR BRAKE(for Rear Drum Brake) A

BRAKE (REAR)  REAR BRAKE(for Rear Drum Brake)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 42403 1.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

a.

Install a new brake drum gasket and rear brake drum sub-assembly.


Hide 2.ADJUST REAR DRUM BRAKE SHOE CLEARANCE

a.

Temporarily install 2 wheel nuts.


b.
C323754C01
0,0 0,0 false
V113147

Expand


Using a screwdriver, remove the shoe adjusting hole plug, and turn the adjuster to expand the shoe until the drum locks.


c.
C323755C01
1.688,1.708 1.688,1.969 1.688,1.969 1.302,1.969 false 1.094,1.896 1.292,2.073 0.198,0.177 10 true *1
*1 Rear Brake Automatic Adjust Lever
V113147

Contract


Hold the rear brake automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjustment bolt using another screwdriver until the drum rotates smoothly.

Standard:

13 notches



d.

Install the shoe adjusting hole plug.


e.
C323388

Measure the brake drum inner diameter and the diameter of the brake shoes. Check that the difference between the diameters is equal to the specified shoe clearance.

Standard shoe clearance:

0.5 mm (0.0197 in.)



Hide 3.BLEED BRAKE LINE (w/ VSC)

Hide 4.BLEED BRAKE LINE (w/o VSC)

Hide 5.BLEED CLUTCH LINE (for Manual Transmission)

Hide 7.CHECK PARKING BRAKE LEVER TRAVEL

Hide 8.ADJUST PARKING BRAKE LEVER TRAVEL