Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR DRIVE UNIT › from 2016.01
RM3270E _59 Vehicle Exterior _041717 DOOR / HATCH _0205112 POWER BACK DOOR DRIVE UNIT A

DOOR / HATCH  POWER BACK DOOR DRIVE UNIT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 84280D 1.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH

Hide 68920 2.REMOVE POWER BACK DOOR UNIT ASSEMBLY LH

a.
B408701

Disconnect the connector.


b.
B426542C02
2.802,0.708 2.552,0.292 2.552,0.292 2.302,0.292 true 2.115,0.198 2.427,0.396 0.313,0.198 10 true *a
*a Grommet
V100155

Protective Tape


Detach the grommet.


c.

Using a thin-bladed screwdriver with its tip wrapped in protective tape, remove the 2 stop rings along their grooves.


d.

Detach the 2 ball joints and remove the back door stay assembly LH.

NOTICE:

Remove the power back door unit assembly set LH while supporting the back door by hand.



Hide 68946 3.REMOVE UPPER BACK DOOR DAMPER STAY BRACKET LH

a.
B426543

Remove the 2 bolts and upper back door damper stay bracket LH.


Hide 68948 4.REMOVE LOWER BACK DOOR DAMPER STAY BRACKET LH

a.
B426544

Remove the 2 bolts and lower back door damper stay bracket LH.