84820
1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD)
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
| *b | LED Illumination |
Check that the LED illuminates. (w/ Smart Entry and Start System)
Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.
| Battery connection | Result |
|---|---|
| Battery positive (+) - 3 (ILL+)
Battery negative (-) - 13 (ILL-) |
LED illuminates |
If the result is not as specified, replace the power window regulator master switch assembly.
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
| *b | LED Illumination |
Check that the LED illuminates. (w/o Smart Entry and Start System)
Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.
| Battery connection | Result |
|---|---|
| Battery positive (+) - 17 (ILL+)
Battery negative (-) - 5 (ILL-) |
LED illuminates |
If the result is not as specified, replace the power window regulator master switch assembly.
| *a | Lock |
| *b | Unlock |
| *c | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
Measure the resistance according to the value(s) in the table below. (w/o Smart Entry and Start System)
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 8 (L) - 9 (E) | Lock switch pushed | Below 1 Ω |
| 8 (L) - 9 (E) | Lock switch not pushed | 10 kΩ or higher |
| 2 (UL) - 9 (E) | Unlock switch pushed | Below 1 Ω |
| 2 (UL) - 9 (E) | Unlock switch not pushed | 10 kΩ or higher |
If the result is not as specified, replace the power window regulator master switch assembly.
84820
2.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD)
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
| *b | LED Illumination |
Check that the LED illuminates. (w/ Smart Entry and Start System)
Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.
| Battery connection | Result |
|---|---|
| Battery positive (+) - 3 (ILL+)
Battery negative (-) - 13 (ILL-) |
LED illuminates |
If the result is not as specified, replace the power window regulator master switch assembly.
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
| *b | LED Illumination |
Check that the LED illuminates. (w/o Smart Entry and Start System)
Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.
| Battery connection | Result |
|---|---|
| Battery positive (+) - 11 (ILL+)
Battery negative (-) - 5 (ILL-) |
LED illuminates |
If the result is not as specified, replace the power window regulator master switch assembly.
| *a | Lock |
| *b | Unlock |
| *c | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
Measure the resistance according to the value(s) in the table below. (w/o Smart Entry and Start System)
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (L) - 1 (E) | Lock switch pushed | Below 1 Ω |
| 2 (L) - 1 (E) | Lock switch not pushed | 10 kΩ or higher |
| 8 (UL) - 1 (E) | Unlock switch pushed | Below 1 Ω |
| 8 (UL) - 1 (E) | Unlock switch not pushed | 10 kΩ or higher |
If the result is not as specified, replace the power window regulator master switch assembly.