Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
89747
1.REMOVE WIRELESS DOOR LOCK BUZZER
| *a | 90° |
|
Turn in this Direction |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
|
Screw |
|
Clip |
|
Slide in this Direction |
Remove the 3 screws.
Remove the 10 clips.
Slide the front fender liner RH toward the rear of the vehicle and down to create a clearance as shown in the illustration.
Disconnect the connector.
Using a clip remover, detach the clamp and remove the wireless door lock buzzer.