8598A
1.INSPECT DOOR CONTROL BATTERY
| *a | Component without harness connected
(Door Control Battery) |
Inspect the door control battery.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 5 (BATB) - 11 (DRLY) | Voltage is not applied between terminals 8 (IG) and 9 (ACTG) | Below 1 Ω |
| Voltage is applied between terminals 8 (IG) and 9 (ACTG) | 10 kΩ or higher |
If the result is not as specified, replace the door control battery.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 11(DRLY) - Battery negative (-) | Battery positive (+) - 8 (IG)
Battery negative (-) - 9 (ACTG) |
11 to 14 V |
| 3 (EDOR) - Battery negative (-) |
If the result is not as specified, replace the door control battery.