Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) › from 2016.01
RM3270E _58 Vehicle Interior _041711 SEAT _0203009 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



PROCEDURE

Hide 71960B 1.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

a.

Remove the rear seat center headrest assembly.


Hide 71940A 2.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the rear seat headrest assembly.


Hide 72526E 3.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

a.
B402776C01
0.552,2.823 0.948,2.854 true 1.865,1.729 2.448,2.063 true 2.5,2.01 2.729,2.208 0.229,0.198 10 true *1 0.292,2.719 0.521,2.917 0.229,0.198 10 true *2
*1 Snap Ring
*2 Magnet Hand


Operate the reclining adjuster release handle LH in the direction indicated by the arrow to align the position of the removal hole as shown in the illustration.


b.

Using a magnet hand inserted into the removal hole at the position shown in the illustration, detach the snap ring and remove the reclining adjuster release handle LH.


Hide 71844D 4.REMOVE REAR SEAT RECLINING COVER LH

a.
B404907

Remove the screw.


b.

Detach the claw and guide and remove the rear seat reclining cover LH.


Hide 71844E 5.REMOVE REAR SEAT RECLINING COVER LH

B402777C01
1.063,0.625 0.76,0.396 true 0.573,0.281 0.885,0.479 0.313,0.198 10 false *1
*1 Protective Tape
V113147

Remove in this Direction


a.

Using a screwdriver with its tip wrapped with protective tape, detach the claw.


b.

Pull up the rear seat reclining cover LH as shown in the illustration to remove it.


Hide 72830 6.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

a.

Remove the bolt.

B402778C01
2.333,1.896 2,1.313 true 0.854,1.875 0.583,1.448 true 0.875,1.885 1.104,2.083 0.229,0.198 10 true *1 2.323,1.938 2.552,2.135 0.229,0.198 10 true *1
*1 Stopper Pin - -
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)



b.

Lift up the rear seat center armrest assembly in the removal direction (1) and remove the stopper pin.


c.

Pull out the rear seat center armrest assembly in the removal direction (2) to detach the guide and remove the rear seat center armrest assembly.


d.
B402779

Remove the plate.


Hide 71931B 7.REMOVE REAR SEAT NO. 1 HEADREST SUPPORT ASSEMBLY

a.
B402780

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.


b.

Pull out the fasteners as shown in the illustration.

B402781C01
0,0 0,0 false
V113147

Remove in this Direction - -



c.
B410986C01
0,0 0,0 false
V113147

Remove in this Direction


Open the fasteners as shown in the illustration.


d.
B402784C01
0,0 0,0 false
V113147

Remove in this Direction


Pull up the direction indicated by the arrow shown in the illustration, detach the claw and remove the 4 rear seat No. 1 headrest support assemblies.


Hide 8.REMOVE SEATBACK COVER WITH PAD

a.
B402783

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.


b.
B402785C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out the rear end of the seatback cover with pad in removal direction (1) shown in the illustration.


c.

Lift up removal direction (2) shown in the illustration to remove the seatback cover with pad.


Hide 79014 9.REMOVE NO. 1 SEATBACK COVER SUB-ASSEMBLY LH

a.
B402786

Remove the 6 hog rings.


b.
B402787

Remove the 6 hog rings and No. 1 seatback cover sub-assembly LH from the No. 1 seatback pad LH.


Hide 10.REMOVE SEAT COVER WIRE

a.
B402788

Remove the seat cover wire.


Hide 72616A 11.REMOVE REAR SEATBACK LOCK STRIKER COVER LH

a.
B410990

Move the No. 1 seatback frame sub-assembly LH in the direction indicated by the arrow shown in the illustration.


b.
B402790

Detach the claw and clip and remove the rear seatback lock striker cover LH.


Hide 72618 12.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

a.
B402791

Detach the claw and clip and remove the rear seatback lock striker protector.


Hide 72616A 13.REMOVE REAR SEATBACK LOCK STRIKER COVER LH

a.
B402792

Detach the claw and clip and remove the rear seatback lock striker cover LH.


b.
B421279

w/ Seat Belt Warning System:

Detach the Clamp.


Hide 72618 14.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

a.
B402793

Detach the claw and clip and remove the rear seatback lock striker protector.


Hide 72666B 15.REMOVE REAR SEAT LOCK COVER LH

a.
B402794

Remove the clip.


b.

Detach the guide and remove the rear seat lock cover LH.


Hide 72666B 16.REMOVE REAR SEAT LOCK COVER LH

a.
B402795

Remove the clip.


b.

Detach the guide and remove the rear seat lock cover LH.


Hide 79106 17.REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH

a.
B402796

Remove the 4 nuts and No. 1 seat leg sub-assembly LH.


Hide 72660F 18.REMOVE REAR SEAT LOCK ASSEMBLY LH

a.
B411841C01
0.854,1.073 0.573,0.49 true 0.458,0.292 0.771,0.49 0.313,0.198 10 false *1
*1 Cable End
V113147

Remove in this Direction


Detach the casing cap.


b.

Turn the cable end in the removal direction shown in the illustration and disconnect the cable end.


c.
B402798

Detach the hook.


d.

Using a T55 "TORX" socket wrench, remove the 2 "TORX" bolts and rear seat lock assembly LH.


Hide 72660F 19.REMOVE REAR SEAT LOCK ASSEMBLY LH

a.
B404897C03
0.74,0.542 0.99,1.083 true 0.604,0.354 0.917,0.552 0.313,0.198 10 false *1
*1 Cable End
V113147

Remove in this Direction


Detach the casing cap.


b.

Turn the cable end in the removal direction shown in the illustration and disconnect the cable end.


c.
B403746

Using a T55 "TORX" socket wrench, remove the 2 "TORX" bolts and rear seat lock assembly LH.


Hide 72201B 20.REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH

a.
B403747

Detach the claw.


b.
B403752

Slide the rear seat inner track assembly LH and rear seat outer track assembly LH in the direction indicated by the arrow shown in the illustration and remove the 4 bolts.


c.

Insert a screwdriver with its tip wrapped with protective tape into the removal hole of the rear seat inner track assembly LH in the direction indicated by the arrow shown in the illustration. Then, while pulling the screwdriver as shown, detach the lock spring.

B403749C01
0.844,1.865 1.031,1.51 true 2.479,1.917 2.677,1.594 true 4.01,1.927 4.229,1.594 true 4.25,1.125 4.469,0.823 true 2.74,1.104 2.958,0.802 true 1.135,1.125 1.354,0.823 true 0.656,1.313 0.635,0.875 true 2.385,1.375 2.167,0.875 true 3.469,1.229 3.615,0.823 true 0.594,0.708 0.906,0.906 0.313,0.198 10 false *1 2.073,0.698 2.385,0.896 0.313,0.198 10 false *1 3.625,0.656 3.938,0.854 0.313,0.198 10 false *1 0.667,1.823 0.979,2.021 0.313,0.198 10 false *2 2.313,1.875 2.625,2.073 0.313,0.198 10 false *2 3.833,1.844 4.146,2.042 0.313,0.198 10 false *2 2.979,0.688 3.292,0.885 0.313,0.198 10 false *3 4.458,0.698 4.771,0.896 0.313,0.198 10 false *3 1.354,0.688 1.667,0.885 0.313,0.198 10 false *3
*1 Seat Track Handle Sub-assembly LH *2 Lock Spring
*3 Protective Tape - -
V113147

Remove in this Direction - -



d.

Insert a screwdriver with its tip wrapped with protective tape into the removal hole of the rear seat outer track assembly LH in the direction indicated by the arrow shown in the illustration. Then, while pulling the screwdriver as shown, detach the lock spring.

B403750C01
3.26,2.031 3.188,1.719 true 4.885,2.021 4.813,1.708 true 6.375,2 6.417,1.677 true 3.042,1.208 2.854,0.854 true 4.531,1.188 4.354,0.875 true 6.125,1.198 6,0.896 true 3.729,1.354 3.792,0.75 true 5.292,1.406 5.406,0.781 true 6.781,1.427 6.813,0.792 true 3.708,0.573 4.052,0.792 0.344,0.219 11 false *1 5.375,0.583 5.719,0.802 0.344,0.219 11 false *1 6.74,0.594 7.083,0.813 0.344,0.219 11 false *1 2.708,0.667 3.052,0.885 0.344,0.219 11 false *3 4.198,0.688 4.542,0.906 0.344,0.219 11 false *3 5.844,0.719 6.188,0.938 0.344,0.219 11 false *3 6.208,2.042 6.552,2.26 0.344,0.219 11 false *2 4.833,2.052 5.177,2.271 0.344,0.219 11 false *2 3.208,2.073 3.552,2.292 0.344,0.219 11 false *2
*1 Seat Track Handle Sub-assembly LH *2 Lock Spring
*3 Protective Tape - -
V113147

Remove in this Direction - -



e.
B403751C01
0,0 0,0 false
V113147

Remove in this Direction


Pull out the seat track handle sub-assembly LH as shown in the illustration to remove it.


Hide 72190 21.REMOVE REAR SEAT INNER TRACK ASSEMBLY LH

a.
B403753C01
0,0 0,0 false
V113147

Remove in this Direction


Slide the rail and remove the bolt and rear seat inner track assembly LH as shown in the illustration.


Hide 72170 22.REMOVE REAR SEAT OUTER TRACK ASSEMBLY LH

a.
B403754C01
0,0 0,0 false
V113147

Remove in this Direction


Slide the rail and remove the bolt and rear seat outer track assembly LH as shown in the illustration.


Hide 73340C 23.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

a.
B403755

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.


b.
B403758

Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.


c.

Pull out the fasteners as shown in the illustration.

B403756C02
0,0 0,0 false
V113147

Remove in this Direction - -



d.
B403757C01
0,0 0,0 false
V113147

Remove in this Direction


Open the fasteners as shown in the illustration.


e.
B421274C01
0,0 0,0 false
V113147

Remove in this Direction


While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly and rear center seat lap type belt assembly LH from the slit as shown in the illustration.


f.

w/ Seat Belt Warning System:

i.

Disconnect the connector.

B445467C01
4.865,0.635 5.021,0.833 0.156,0.198 10 false A
V100135

Connector
V100136

A



ii.

Detach the clamp.



g.
B409119

Remove the bolt.


h.
B409120C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the rear center seat lap type belt assembly LH from the hole of the seat cushion cover with pad LH as shown in the illustration.


Hide 73330C 24.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH

a.

w/ Seat Belt Warning System:

i.

Detach the clamp.

B427427



b.
B409118C01
1.583,1.104 0.74,0.635 true 0.51,0.521 0.823,0.677 0.313,0.156 10 true *a
*a Band
V113147

Remove in this Direction


Disconnect the rear center seat lap type belt assembly RH from the band as shown in the illustration.


c.
B409115C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the bolt and the rear center seat lap type belt assembly RH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.


Hide 25.REMOVE SEAT CUSHION COVER WITH PAD

a.
B403761

Move the No. 1 seatback frame sub-assembly LH in the direction indicated by the arrow shown in the illustration.


b.
B403762C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out the rear end of the seat cushion cover with pad in removal direction (1) shown in the illustration.


c.

Lift up in removal direction (2) shown in the illustration to remove the seat cushion cover with pad.


Hide 79012 26.REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.
B403763

Remove the 3 hog rings.


b.
B403764

Remove the 14 hog rings and No. 1 seat cushion cover sub-assembly LH from the No. 1 seat cushion pad LH.


Hide 27.REMOVE SEAT COVER WIRE

a.
B403765

Remove the seat cover wire.


Hide 71875B 28.REMOVE RECLINING ADJUSTER INSIDE COVER RH

a.
B403766

Detach the claw and guide and remove the reclining adjuster inside cover RH.


Hide 71876 29.REMOVE RECLINING ADJUSTER INSIDE COVER LH

a.
B403767

Detach the claw and guide and remove the reclining adjuster inside cover LH.


Hide 71878A 30.REMOVE REAR SEAT INNER RECLINING COVER RH

a.
B403768

Detach the claw and guide and remove the rear seat inner reclining cover RH.


Hide 71879B 31.REMOVE REAR SEAT INNER RECLINING COVER LH

a.
B403769

Detach the claw and remove the rear seat inner reclining cover LH.


Hide 71878B 32.REMOVE REAR SEAT INNER RECLINING COVER RH

a.
B403770

Remove the screw.


b.

Detach the guide and remove the rear seat inner reclining cover RH.


Hide 71879C 33.REMOVE REAR SEAT INNER RECLINING COVER LH

a.
B403771C01
0,0 0,0 false
V113147

Remove in this Direction


While pulling up the rear seat inner reclining cover LH as shown in the illustration, detach the claw and remove it.


Hide 72666B 34.REMOVE REAR SEAT LOCK COVER LH

a.
B404971

Detach the claw and guide and remove the rear seat lock cover LH.


Hide 79104 35.REMOVE NO. 1 SEATBACK FRAME SUB-ASSEMBLY LH

a.
B403772C01
0.354,1.604 0.573,1.427 true 0.177,1.573 0.49,1.771 0.313,0.198 10 false *1
*1 Cable End
V113147

Remove in this Direction


Detach the casing cap.


b.

Turn the cable end in the removal direction shown in the illustration and disconnect the cable end.


c.
B403773

Remove the 4 bolts and No. 1 seatback frame sub-assembly LH.


Hide 78950 36.REMOVE NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY

a.
B403774C01
0,0 0,0 false
V113147

Remove in this Direction


Pull out and remove the No. 1 fold seat stopper band assembly as shown in the illustration.


Hide 78920B 37.REMOVE NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY LH

a.
B403775C01
2.833,2.208 2.656,1.979 true 2.5,1.844 2.813,2.042 0.313,0.198 10 false *1
*1 Cable End
V113147

Remove in this Direction


Detach the casing cap.


b.

Turn the cable end as shown in the illustration, disconnect the cable end and remove the rear No. 1 fold seat lock control cable assembly LH.


Hide 72620B 38.REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

a.
B403776C01
2.813,0.385 2.75,0.25 false 2.698,0.125 3.01,0.323 0.313,0.198 10 false *1
*1 Protective Tape
V113147

Remove in this Direction


Move a screwdriver with its tip wrapped with protective tape in the direction indicated by the arrow to widen and remove the 3 wiring harness clamps as shown in the illustration.


b.
B403777C01
1.75,0.646 2.083,0.635 true 1.563,0.573 1.781,0.76 0.219,0.188 10 true *1
*1 Cable End
V113147

Remove in this Direction


Detach the casing cap.


c.

Turn the cable end as shown in the illustration, disconnect the cable end and remove the rear No. 1 seat lock cable assembly.